Teixeira Tech has unveiled its new new X-Treme Ground Clearance A-arms and radius rods for the Polaris RZR XP 1000 and RZR 900 two- and four-seat models.

While best known for its Sport ATV chassis components, Teixeira Tech isn’t new to UTVs. It spent over two years developing the XGC A-arms and radius rods for the RZR 900 and throughout the past nine months have remained busy developing and testing XGC components for the new RZR XP 1000.

“We construct our chassis parts with TIG welded 4130 chromoly in precision built jigs,” Teixeira Tech says in a release. “With the shock mounting points in the same location as stock, there’s no need to spend thousands of dollars modifying or replacing them.”

Get the Flash Player to see this player.

XGC A-Arms

Teixeira’s XGC A-arms are designed to deliver X-Treme ground clearance over the widest possible area. They’re constructed with lightweight, 1 ¼-inch chromoly tubing. They accept stock or OE size replacement bushings and work with stock or optional heavy-duty Frap Ball Joints. Currently available as lower A-arms only, Teixeira Tech will soon be offering chromoly, replacement upper arms, available by themselves, or as a complete set with the XGC lower A-Arms.

Teixeira Tech A-arms Radius Rods

XGC Radius Rods

Like its A-arms, Teixeira’s lower radius rods are designed to deliver X-Treme ground clearance over the widest possible area. Teixeira says the boxed I-beam design provides superior strength, rigidity, and lighter weight compared to other ground clearance radius rods with a tubular design. The rods come complete with U.S. Made, high strength, PTFE lined rod ends and corrosion resistant stainless steel reducers.

Our upper radius rods are constructed of one-inch chromoly tubing. Along with being lighter than the stock rods, Teixeira says they can withstand three times the pressure before bending. Threaded Heim joints at the end of the rods allow you to adjust the rear wheel’s camber (the amount the wheels lean in at the top) to help fine tune the handling of the car. The lower and upper radius rods can be ordered individually, or as a complete set.

Teixeira Tech XGC A-arms and radius rods are available in a number of powder coat colors or chromed to suit the look of your machine.

Pricing starting from: XGC Lower A-Arms – $395.00 XGC Lower Radius Rods – $365.00 Upper Radius Rods – $235.00

Visit TeixeiraTech.com for more information.



Find a ATV Dealer near you

Enter your ZIP code below to search for ATV dealers near you.


ralph elwood says:

I see other lower radius arms say they won’t work with the stock Polaris 1000 rear bumper, will the Teixeira xgc lowers work with the stock Polaris bumper w/o hitting? I definitely like their design better than the others I have seen.

Lucas Cooney says:

I’ll give the folks at Teixeira Tech a call and ask.

One of our writers did a full review of the XGC Radius Rods and A-Arms. You can read it here – https://www.atv.com/products/teixeira-tech-xgc-radius-rods-and-aarm-review-2326.html

Ed Teixeira says:

We have not had anyone purchase our XGC Radius Rods with the Polaris add on bumper.  I could not give you an accurate answer.  If you have the time and have the bumper mounted, can you give me a call at the shop so that I can get some measurements from you?  With these measurements, I should be able to let you know if there will be any clearance problems.  Here is a link to our contact info:

Email this article to a friend