SpecificationsEngine: Four-stroke, air-cooled single
Bore x stroke: 82 x 76mm
Compression ratio: 8.6:1
Carburetor: Nikki 6C1026
Air filter: Snorkel-type with two-stage dry replaceable element
Oil filter: Automotive-type spin-on canister
Ignition: Magneto and transistor
Electrical: 12V DC, 14 amp-hour battery, alternator
Transmission: Continuously variable transmission with high and low range, plus reverse
Final drive: Shaft-driven selectable four-wheel drive, dual-mode rear differential
Exhaust: Muffler with USFS-approved spark arrestor
Front tires: 24x9-10 tubeless
Rear tires: 24x11-10 tubeless
Front suspension / wheel travel: MacPherson strut / 3.1 in.
Rear suspension / wheel travel: Unit swing axle / 3.1 in.
Brakes: Four-wheel hydraulic drums, triple sealed
Fuel capacity: 4.1 gal.
Curb weight: 1,010 lbs.
Overall length: 108.8 in.
Overall width: 52.6 in.
Overall height: 70.9 in.
Wheelbase: 70.0 in.
Ground clearance: 6.7 in.
Roll over protective structure (ROPS): This structure meets ROPS requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, and 7.5 and also meets FMVSS 216 Roof Crush resistance requirement
Cargo bed dimensions (LxWxH): 41.1 x 35.4 x 9.6 in. / 10.9 cu. ft.
Load capacity: 926 lbs.
Cargo bed capacity: 400 lbs.
Towing capacity: 1,100 lbs.
Turning radius: 10.8 ft.
Top speed: 25 mph, governed
Instruments: Oil temperature meter, hour meter, 35w headlights, taillight and stoplight
Color choices: Dark Royal Red, Smoky Blue
At a glanceRugged and compact 4x4 off-road utility vehicle
Can be easily transported in the back of a full-size pickup truck
Can tow up to 1,100 lbs. with optional Kawasaki trailer hitch installed
Realtree® APG™ HD® Camouflage
Fan-Cooled, Single-Cylinder EngineSimple, lightweight, durable, and quiet 401cc four-stroke engine
Modern four-stroke overhead valve design for efficient running and good fuel economy
Fan cooling helps the engine maintain an ideal operating temperature
Easy StartingChoke opens throttle during starting so accelerator pedal does not need to be depressed
Can be started in gear by stepping on the brake pedal
Gear Driven Engine BalancerBalance weight moves opposite to the piston, dramatically reducing vibration, minimizing noise and wear
Maximizes operator comfort, and diminishes fatigue
Environmentally Friendly EmissionsCarburetor settings reduce exhaust emissions
Positive crankcase ventilation system recycles blow-by gasses to the intake tract to be burned in the engine
Muffler has USFS-approved spark arrestor
California models have a check valve on the fuel tank to charcoal canister connector hose for preventing gasoline from entering the canister when operating on inclines or over rough terrain
Kawasaki Automatic Power-Drive System (KAPS)Simple and lightweight CVT is fully automatic and keeps engine speed in the most efficient range for any selected vehicle speed, load, or terrain
Fully automatic transmission with selectable 2- or 4-wheel drive
An open-sided drive pulley cools better for longer belt life.
Belt deflection can easily be adjusted by changing shim thickness of the adjuster bolt located on the outside of the driven converter
Cooling air flows in from a vent in the cab frame through a special air filter, which keeps out water and dust for increased belt life
Exhaust duct reshape to prevent contact with the frame
Long wearing double cog CVT belt
Dual-Mode DifferentialLocked mode for maximum traction in difficult conditions
Unlocked mode decreases turning radius and minimizes ground disturbance - great for use on grass.
Rack and Pinion SteeringRack-and-pinion steering helps to keep steering light and accurate, which makes maneuvering in tight working quarters a snap
Durable, simple and easy to maintain
MacPherson Strut Independent Front SuspensionComfortable ride and excellent load-carrying capability
Simple, rugged single A-arm design offers tight turning radius for extra maneuverability
Unit Swingarm Rear SuspensionUnique design places engine and rear wheels on a sub-frame with a mid-point pivot
Can handle heavy loads, yet provides comfortable ride with an empty cargo bed
TiresLarge 24-inch tires feature a tread pattern that offers good off-road traction and ride quality while keeping tire wear low
ChassisSelf-Adjusting, hydraulic drum brakes at all four wheels provide ample stopping power
Front grille includes space for mounting a 3000-pound capacity winch
Compact, lightweight, and easy to transport to the job, easily fitting in the bed of a full-sized pickup
Bench seat is spacious and comfortable for two
Durable plastic body panels resist dents and color is molded in for long lasting good looks
Safety EquipmentMeets Roll Over Protective Structure (ROPS) requirements for wheeled tractors under SAE J1194, 7.1.1, 7.1.2, 7.4, and 7.5, and also meets FMVSS 216 roof crush resistance requirement
Two seat belts
Speed limited to 25 mph
Ample StorageLarge storage tub under the hood with four D-rings to secure the load
Passenger side glove box
Cup holders located at each side of the front hood by the dash
Tilting Cargo BedSteel cargo bed can carry up to 400 pounds and tilts for quick unloading
Thick tailgate panel and secure latching tailgate locking pins reduce vibration and noise, and adds durability
Simple MaintenanceCrankcase oil level dipstick
Dual element air cleaner
CVT cover has a convenient drain plug
Cab FeaturesAutomotive style dash designed for ease of use with easy reach controls
Standard equipment hour meter makes maintenance intervals easy to track
Oil temperature warning light
Gear selector for HI, Low, Neutral, and Reverse
Differential locking lever
Convenient parking brake
Headlight switch for powerful and stylish 35w headlights
Popular Accessory ItemsSoft or Hard Top